Search the forum,

Discuss Dust and eye protection masks in the Canada Tile Advice area at TilersForums.com.

Wishiwasatoptiler

TF
Esteemed
Arms
Reaction score
643
Points
1,108
Location
Northeast
Hi
Looking to pick up a few masks for a crappy ceiling pull down job. Looked at these. Any one used them. Are they any good

Would then use for tiling use. Cutting boards, grinding floors etc.
Thanks
Screenshot_20180516-165200.png
 
F

Flintstone

Not sure how well that would seal to the face, also I think p3 is needed for us not p2
 

Wishiwasatoptiler

TF
Esteemed
Arms
Reaction score
643
Points
1,108
Location
Northeast
JSP Force 8 Mask Respirator with Press-to-Check Filters P3 - https://www.NoLinksToThis/p/jsp-force-8-mask-respirator-with-press-to-check-filters-p3/1863f

This is a p3. Looks like it fits snug.
 
F

Flintstone

I use that jsp force 8 but it’s getting a bit tired now, taking it on and off all day isn’t ideal. Do you use them for 1 day impish then throw them away? Would you trust that for heavy dust ?
 
O

One Day

I use that jsp force 8 but it’s getting a bit tired now, taking it on and off all day isn’t ideal. Do you use them for 1 day impish then throw them away? Would you trust that for heavy dust ?

No, just nuisance dust. They aren't the easiest to breathe in for a length of time. Good for a quick dry cut, or mix though.
I bought an M rated vac recently so that sucks up most dust from everything now.
 
F

Flintstone

THe main hazard for us daily is mixing adhesive and grinding porcelain, even with a sponge on the grinder it’s still air bourne. If you mix adhesive on a sunny day with no wind you can see the cloud and it’s pretty immense
 

Reply to Dust and eye protection masks in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is...
Replies
3
Views
1K
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
720
Hello there, Relatively recently we had a new en-suite fitted (complete rip out of the old...
Replies
5
Views
2K
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent...
Replies
3
Views
2K
    • Like
  • Sticky
Water Damaged Shower Repairs Shower tile repair – water damage – tile waterproofing Do you...
Replies
0
Views
2K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top