‘Cloudy’ looking quartz starlight?

[Sherilee Gray]

Hi

I’m hoping someone can advise me. My black quartz tiles always look cloudy/dusty after washing unless I get on my hands and knees and buff them to within an inch of their lives! My knees are in agony! Is there an easier way of getting a wet look?

Thanks

 

[J Sid]

hope your not using washing up.liquid

what are you washing them with? Could be a build of cleaning products

 

[Qwerty]

Any pics?

 

[Sherilee Gray]

hope your not using washing up.liquid

what are you washing them with? Could be a build of cleaning products

Hi, I’m using just plain ol’ water. I have tried cold water and a steam mop but both have the same effect

 

[Sherilee Gray]

Any pics?

Not with me but I will put some on later

 

[J Sid]

are you in a hard water area?

 

[Tile Shop]

The steam mop is a huge no-no on quartz. The temperature (120C....ish) can cause the resin to expand and curl the tile, and it can also damage the resin so that with prolonged use, it will etch the surface and reduce the polish.

A photo would help before advising a cleaner, but depending on whether the polished finish is actually affected and not just a film over them, you can add a surface sealer like LTP Glaze Protector which will put a certain amount of shine back.

Another new product, LTP Satin..... despite the name it's a liquid finishing wax that can be mechanically polished up to a higher shine.

Test areas should be conducted first, other cleaning and maintenance brands are available.

 

[Sherilee Gray]

Here’s a photo, you can see the line where I can run my finger over it and it’s like when you wipe it over a dusty surface

 

[Sherilee Gray]

are you in a hard water area?

Yes, the water here is quite bad. Kettle is always getting furry and the showers get a pinkish mould unless they are steamed regularly.

 

[Sherilee Gray]

Anyone?