Wood burner base hearth - Tile Advice

[choran]

I want to make a base for my wood burner from concrete and tile over. The wood burner stands on four legs and does not appear to radiate heat downwards. I have seen some glass mosaic tiles in a colour that matches my fireplace but have been told they may not be suitable for thermal reasons. Can anyone she's further light? Thanks C

 

[Time's Ran Out]

If your tiling on to a solid base then an area of that size shouldn't have expansion issues, but use a grout that allows movement.
I'd be more concerned with the glass scratching!

 

[WetSaw]

As above. If it's a decent stove I would think that the weight of it would damage glass tiles when you install it.
Don't forget that the hearth has to confirm to building regs regarding it's size.

 

[choran]

As above. If it's a decent stove I would think that the weight of it would damage glass tiles when you install it.
Don't forget that the hearth has to confirm to building regs regarding it's size.

 

[choran]

Thanks
Yes it is heavy - cast iron. Aware of building regs too. Shame about tiles but it does make sense and they are not cheap so to have them damaged would be a waste. Thanks again C

If your tiling on to a solid base then an area of that size shouldn't have expansion issues, but use a grout that allows movement.
I'd be more concerned with the glass scratching!

 

[choran]

Thanks that makes sense
C