L
littledave
Please checkout the following advertisement.
Hi all I'm after some advice. Planning to lay some Heatmat on top of Marmox 6mm boards in my Concrete kitchen floor then tile on top.
The floor has quite a substantial dip/slope probably about 10-15mm where I have removed an old larder cupboard.
I have some Uzin 152 SLC but it concerns me that it says it's cement based.
Can I lay the Marmox using tile https://www.tilersforums.com/forums/tile-adhesive/, Heatmat then the Uzin over the top to create the level ready for tile.
Or would it be better to use the Uzin, then the Marmox, Heatmat and cover with Latex SLC.
Also can I just use a PVA water mix to prime the bare concrete floor.
I'm trying to keep the overall build height down.
The floor has quite a substantial dip/slope probably about 10-15mm where I have removed an old larder cupboard.
I have some Uzin 152 SLC but it concerns me that it says it's cement based.
Can I lay the Marmox using tile https://www.tilersforums.com/forums/tile-adhesive/, Heatmat then the Uzin over the top to create the level ready for tile.
Or would it be better to use the Uzin, then the Marmox, Heatmat and cover with Latex SLC.
Also can I just use a PVA water mix to prime the bare concrete floor.
I'm trying to keep the overall build height down.