richard8688
TF
- Reaction score
- 6
Please checkout the following advertisement.
I am cutting 16mm porcelaine paving with a Vitrex bridge cutter.
I fitted a Vitrex Ultimate blade to replace the standard blade. It cuts better, with less chipping but on a 600mm cut it walks off line by 3mm.
The saw runs true and the standard blade cuts true but it chips like a MF.
So any reason why a blade would wander off by so much?
Any other blades I can try? 200x22.2 mm?
I fitted a Vitrex Ultimate blade to replace the standard blade. It cuts better, with less chipping but on a 600mm cut it walks off line by 3mm.
The saw runs true and the standard blade cuts true but it chips like a MF.
So any reason why a blade would wander off by so much?
Any other blades I can try? 200x22.2 mm?