Discuss Tiles won’t stick to bsa membrane in the Tanking and Wetrooms area at TilersForums.com.

hi advise is needed please I’m not a professional, we installed a wet room in December
Maxxus former
Bsa membrane
Mapei flexible adhesive
Ceramic tiles
Thought we had done a good job however this week we have noticed some of the tiles are squishing water through when we lifted said tiles they don’t seem to have stuck to the mebrane what have we done wrong.
 
O

One Day

It's a bitumen membrane.
Why oh why oh why (etc etc etc) do people still install these?
Cement just doesn't like bitumen.
Underfloor heating definitely doesn't like bitumen.
Hot water makes it melt and release oil into the already weak adhesive bond.

With these membranes, if installed correctly you will achieve waterproofing. But in my experience everything on top gets ruined.
 
D

Dumbo

It's a bitumen membrane.
Why oh why oh why (etc etc etc) do people still install these?
Cement just doesn't like bitumen.
Underfloor heating definitely doesn't like bitumen.
Hot water makes it melt and release oil into the already weak adhesive bond.

With these membranes, if installed correctly you will achieve waterproofing. But in my experience everything on top gets ruined.
Am I right in thinking impey still have it as an option , if so why as waterguard is a far better product .
 

Reply to Tiles won’t stick to bsa membrane in the Tanking and Wetrooms area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
2K
Hi I asked the Wunda technical department if I can just use a Ditra mat only and not the SLC...
Replies
12
Views
3K
I have recently laid around 30msq of porcelain floor tiles in our kitchen. The tiles have been...
Replies
4
Views
2K
Hi All, I am wondering if someone would be able to help me out/explain something. We had a...
Replies
2
Views
3K
    • Like
Hi everyone I am building my own house and now I'm ready to tile the floor downstairs. I have...
Replies
1
Views
1K

Advertisement

Thread starter

Joined
Location
Mansfield

Thread Information

Title
Tiles won’t stick to bsa membrane
Prefix
N/A
Forum
Tanking and Wetrooms
Start date
Last reply date
Replies
34

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.4%
  • Kerakoll

    Votes: 17 10.2%
  • Ardex

    Votes: 12 7.2%
  • Mapei

    Votes: 47 28.1%
  • Ultra Tile

    Votes: 21 12.6%
  • BAL

    Votes: 40 24.0%
  • Wedi

    Votes: 4 2.4%
  • Benfer

    Votes: 4 2.4%
  • Tilemaster

    Votes: 22 13.2%
  • Weber

    Votes: 19 11.4%
  • Other (any other brand not listed)

    Votes: 17 10.2%
  • Nicobond

    Votes: 8 4.8%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 3.0%
Top