Hello. As part of having a new kitchen fitted we had the fitting company tile the kitchen floor. The 'tiler' has grouted, but needs to return to clean up and seal. I am not a tiler, but the current state of the floor looks unacceptable to me. Am I being unreasonable?
The following pictures are by no means exhaustive. If I am correct and this is as bad as it looks to me, then are there any corrective actions that can be made other than ripping up the floor?
This discolored patch looks suspiciously like the adhesive that I saw everywhere before the grout went down.
Chip 1.
Sunken grout?
Cracked tile.
Chip 2.
Grout not properly mixed?
This is a cut tile. Surely the cut edge should be at the edge not in the middle of the floor?
Picture speaks for itself really.
All and any comments/advice welcome.
The following pictures are by no means exhaustive. If I am correct and this is as bad as it looks to me, then are there any corrective actions that can be made other than ripping up the floor?
This discolored patch looks suspiciously like the adhesive that I saw everywhere before the grout went down.
Chip 1.
Sunken grout?
Cracked tile.
Chip 2.
Grout not properly mixed?
This is a cut tile. Surely the cut edge should be at the edge not in the middle of the floor?
Picture speaks for itself really.
All and any comments/advice welcome.