Discuss hardieboard joints in the Adhesive and Grout area at TilersForums. USA and UK Tiling Forum
I take it’s not a wetroom?
Hardibacker fibre tape and https://www.tilersforums.com/forums/tile-adhesive/ will suffice imo.No Dave using a 25mm tray i guess i should use a modified dry set something like Mapie Karaflex Maxi S1 but like i said there is so much choice out there any recommendations from yourself
Thanks
Would you use a polymer https://www.tilersforums.com/forums/tile-adhesive/ or non polymer https://www.tilersforums.com/forums/tile-adhesive/ or would that make little differenceHardibacker fibre tape and https://www.tilersforums.com/forums/tile-adhesive/ will suffice imo.
Nearly all cement based https://www.tilersforums.com/forums/tile-adhesive/ are polymer modified.. 👍 , the https://www.tilersforums.com/forums/tile-adhesive/ just adheres the fibre tape to strengthen the joint..Would you use a polymer https://www.tilersforums.com/forums/tile-adhesive/ or non polymer https://www.tilersforums.com/forums/tile-adhesive/ or would that make little difference
Just want it all prepped good for when I get the tiler in
Thanks Dave as you can tell I ain't got a clue reason I am asking daft questions just want to ensure I do the prep work the best I can for the tilerNearly all cement based https://www.tilersforums.com/forums/tile-adhesive/ are polymer modified.. 👍 , the https://www.tilersforums.com/forums/tile-adhesive/ just adheres the fibre tape to strengthen the joint..
Thanks Dave as you can tell I ain't got a clue reason I am asking daft questions just want to ensure I do the prep work the best I can for the tiler
Had a fitter in that took me for a mug and was using incorrect materials was basically cutting corners to the extreme so pulled him off and decided to do what I can myself and get trades in where I know I would be usless thanks again for your help can I ask 1 more question of you I will be putting a mira 25mm tray down that's on 22mm green chipboard that's been well braced between joists how would you fit the tray sand and cement mix or tile https://www.tilersforums.com/forums/tile-adhesive/ a friend said silicon would be fine but read its not the best way to do it once that's down I will be using 6mm no more ply or rest fo floor then I can get the tiler in can't belive it's been 4 weeks next wendsday with a non functioning bathroo
S1 https://www.tilersforums.com/forums/tile-adhesive/ will be fine , make sure to silicone the tray to the walls as well when you bed the tray in.Thanks Dave as you can tell I ain't got a clue reason I am asking daft questions just want to ensure I do the prep work the best I can for the tiler
Had a fitter in that took me for a mug and was using incorrect materials was basically cutting corners to the extreme so pulled him off and decided to do what I can myself and get trades in where I know I would be usless thanks again for your help can I ask 1 more question of you I will be putting a mira 25mm tray down that's on 22mm green chipboard that's been well braced between joists how would you fit the tray sand and cement mix or tile https://www.tilersforums.com/forums/tile-adhesive/ a friend said silicon would be fine but read its not the best way to do it once that's down I will be using 6mm no more ply or rest fo floor then I can get the tiler in can't belive it's been 4 weeks next wendsday with a non functioning bathroom
Reply to hardieboard joints in the Adhesive and Grout area at TilersForums.com
Or checkout our tile training advice or the Tile Standards
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.