Floor Prep ideas please - Tile Advice

[Nic_P74]

So this is not what I was hoping for on uplift. (But probably should have expected.
Probably latex based LC coming away with vinyl flooring. In varying degrees and where it doesn't old Addy residue.
The original screed is poor as well. So thinking grind off old leveller and worst high spots of original screed before new SLC.
Anybody got any better ideas or tips, I'm up against it time wise on this job so could do without the extra time..

 

[Simon Dale]

So this is not what I was hoping for on uplift. (But probably should have expected.
Probably latex based LC coming away with vinyl flooring. In varying degrees and where it doesn't old Addy residue.
The original screed is poor as well. So thinking grind off old leveller and worst high spots of original screed before new SLC.
Anybody got any better ideas or tips, I'm up against it time wise on this job so could do without the extra time..
View attachment 104822

Speak with the Bal rep they have a magical new mat

 

[Blunt Tool]

Ardex bag and bottle simples

 

[Nic_P74]

Ardex bag and bottle simples

Just remove loose, then straight over with ardex? Very thin layer of screed coming up with the LC in places.

 

[Blunt Tool]

Hit thin layer of slc with hammer and will probably pop up sweep, and use this
ARDITEX NA Ultra Rapid Subfloor Levelling and Smoothing Compound - https://ardex.co.uk/product/arditex-na/

 

[Nic_P74]

Hit thin layer of slc with hammer and will probably pop up sweep, and use this
ARDITEX NA Ultra Rapid Subfloor Levelling and Smoothing Compound - https://ardex.co.uk/product/arditex-na/

Used rakes of that for other floor coverings over the years. Never used it under tiles. I'm putting a 30k kitchen on too of them so wanted to make sure I get it right

 

[Tile Fix Direct]

BAL Flexbone 2Easy Matting - https://www.tilefixdirect.com/product/BAFBONE-2EASY

 

[Albert]

BAL Flexbone 2Easy Matting - https://www.tilefixdirect.com/product/BAFBONE-2EASY

I don't think this product is meant for this situation, pretty sure it states floor needs to be level and sound

 

[Nic_P74]

I ended up removing all the old levelling compound and the worst of the high spots And used arditex na. Fixing with ardex adhesive too