View the thread, titled "Commissioning UFH after laying slate tilies" which is posted in Tiling on Underfloor Heating on Tilers Forums.

Tilers Forums Official Sponsors

I've had a look through threads but cannot find anything on this.
Lots of info on commissioning screed, but I can't find anything on post-screed-commissioning.
The question is: what would be the best UFH commissioining process after laying 10mm slate tiles? 10mm slate tiles on a solid 6mm adhesive bed, onto Mapai WP200.
They are laid onto a screed which has been thoroughly dried (text book heat stressed >12 months ago).
Q1: how long to wait to turn on UHF
Q2: how/when to increase UFH temp
Many thanks!
 
Basically it’s just like commissioning a screed. Same slow temperature increments each day and then slow lowering of temperature. Most manufacturers say commissioning of adhesive etc at around 14 days. To prevent shock to adhesive and grout.
 

Reply to the thread, titled "Commissioning UFH after laying slate tilies" which is posted in Tiling on Underfloor Heating on Tilers Forums.

Advertisement

Weekly Email Digest

Back
Top

Click Here to Register for Free / Remove Ad