Can anyone identify these tiles? - Tile Advice

[hopelessDIYer]

I need to replace this tile - the black/grey one. Approx 50 cm x 25 cm. Does anyone know where it might be from?

Mosaic tile shown in case it makes them easier to identify is 50 cm x 12 cm.

 

[Dave]

It would help if there was a spare to see the back. Otherwise its only of someone on here has used them before

 

[hopelessDIYer]

It would help if there was a spare to see the back. Otherwise its only of someone on here has used them before

Back looks like this

 

[Huddersfield Tiling]

Dunno, but I can see that the installer has used ready-mixed adhesive which is unsuitable for those porcelain tiles. Also, the installer has used grout instead of silicone in the corner. I'm guessing you have a tile failure to deal with?

 

[hopelessDIYer]

Dunno, but I can see that the installer has used ready-mixed adhesive which is unsuitable for those porcelain tiles. Also, the installer has used grout instead of silicone in the corner. I'm guessing you have a tile failure to deal with?

No it didn't fail, I removed it.

 

[Dave]

Back looks like this
View attachment 114158

Sorry but can’t name the tiles from either pic. Good luck sourcing

 

[hopelessDIYer]

Sorry but can’t name the tiles from either pic. Good luck sourcing

Ok, thanks anyway

 

[Huddersfield Tiling]

No it didn't fail, I removed it.

Why?

 

[Greslove]

Identifying is hard cuz its classic wall tile with dimensions 25 x 50, o lot of manufacturers produce those dimensions but with MADE IN SPAIN you can try - STN, HALCON or ARGENTA.

 

[Al vinti]

I need to replace this tile - the black/grey one. Approx 50 cm x 25 cm. Does anyone know where it might be from?

Mosaic tile shown in case it makes them easier to identify is 50 cm x 12 cm.


View attachment 114157

 

[Al vinti]

It looks like xian negro from keraben, its ceramic not porcelain so ready mix adhesive is fine.

 

[Al vinti]

Cian Negro by Keraben, ceramic so ready mix adhesive ok.