Builders using Hardiebacker boards - Tile Advice

[Blunt Tool]

well after years of trying to convince one of the builders I do work for he’s finally ditched the plywood and is now using Hardiebacker boards. He’s now a convert and is going to use them wherever tiling is required. I showed him in a small bathroom today how to glue and screw them, I could have told him 12 screws is all required per sheet but he’s used to 150 centres so just left him to it. He is going to get the foam adhesive as he is a builder and too lazy to mix up addey clean tools buckets etc but I’ll cut him a bit of slack.

 

[Waluigi]

Did you tell him to snap the board he might find it easier doing it the opposite way?

 

[Blunt Tool]

Did you tell him to snap the board he might find it easier doing it the opposite way?

No that’s my preferred method I don’t like the other way and he can do whatever way he wants to achieve results

 

[Waluigi]

The jury is out for me which is easiest. Still undecided.

 

[Andy Allen]

I just use a grinder...

 

[Waluigi]

I use ply 90% of the time

 

[Bopster]

I just use a grinder...

Same here on 12mm, cutouts in 6mm also, just make sure ur outside and wear a mask

 

[Blunt Tool]

I use ply 90% of the time

You might be interested
Flooring Forum - Flooring Advice Forum | Flooring Forum | The Original Flooring Advice Forum - https://www.flooringadviceforum.com/

 

[Time's Ran Out]

@callatiler - you missed the subtlety of his reply!

 

[Flintstone]

He's a plumber I'd expect nothing else than ply !

 

[Waluigi]

I do use HB when I use Rigid Tiles. Will probably have a few more encaustic jobs this year so more HB unfortunately.

 

[Flintstone]

Are you on the wind up Luigi ?

 

[Waluigi]

No. I don’t do many tiled floors so don’t need to use HB much.

 

[Dumbo]

Are you on the wind up Luigi ?

For once no hb = hardie backer and ply for his 90 % of the time lvt jobs

 

[Waluigi]

Thanks for deciphering my abreviation.