Black Limestone Paving Nightmare!!!!! Please help!!!! - Tile Advice

[White Room]

Sbr has a blue tinge against black until it dries

 

[DHTiling]

Try the liquid in an inconspicuous area first..

Then see how it dries... that's all i can recommend on that really but worth a try..

 

[Cheeseboy7]

Thanks both for all your help/suggestions. Really, really appreciated. I'll report back on my results.

 

[DHTiling]

Please do as this adds to info for others to follow.

 

[Cheeseboy7]

Hi,

Spoke to the guy who sold me the slabs. He said he reckoned i'd get the stains out with a heavy duty pressure washer. He said that's what he uses. I reckon my pressure washer may not be strong enough.

What do you think? shall i try this before the cleaner?

Thanks

 

[Olz]

Ask him to lend you his, im not convinced, the products dave has suggested are the way to go in my opinion, I really hope you manage to get it sorted mate, it would be tragic if that was ruined after your hard work.

 

[nybor62]

is this the same guy who sold you the sealer ,to put on after you grouted,
sounds like he aint got a clue , take the advice dave as given you first , ok pal
and good luck

 

[Gazzatile]

Have you asked him to come and clean it for you as he gave you the wrong info save you having to do it all yourself

 

[PaulCollins]

hi there.

i have a similar issue, although nowhere near as badly stained.
going to try the products Dave suggested (how did you get on with those btw?)

also wondered if anyone could recommend a good sealer for black limestone - there are plenty on offer but i'm sure some are much better than others.

thanks..

 

[doug boardley]

hi there.

i have a similar issue, although nowhere near as badly stained.
going to try the products Dave suggested (how did you get on with those btw?)

also wondered if anyone could recommend a good sealer for black limestone - there are plenty on offer but i'm sure some are much better than others.

thanks..

LTP is the brand I use, check it out here
LTP Online

 

[Unregistered]

I really wish people would post the results.... You read all the suggestions but never find out the outcome!

 

[Heinrich]

Your going to need a ph neutral cleaner, you can get them from Amazon a stiff broom and don’t use mortar to fill the joints, use something called easy joint, it’s between £30-40 per tub, sets with water.
But all of this apart from the jointing needs to be done in a couple of weeks.
Wet the Slavs before laying them too as it helps stop muck from getting in.
But it’s just going to take a good scrub wit a PH NEUTRAL cleaner.

 

[Creighton280965]

As a stone practitioner, I suggest that limestone should not be sealed or cleaned with alkaline materials. You can refer to this article.