Adhesive for Sheet Metal - Tile Advice

[Greg1957]

I am installing ditra over OSB board and there is a floor vent in the one wall inside the bathroom. The sheet metal is folded out and there is about 2-3 inches of the sheet metal that stick out onto the floor from under the baseboard. The Ditra will go over the sheet metal and I wanted to know what is the best adhesive to use that will make the Ditra adhere to the sheet metal.

 

[Old Mod]

Hi and welcome to the forum Greg.

If your using ditra get a tube of Kerdi Fix, that sticks to metal, plastics etc
Designed for just that job. 😊

 

[LM]

Or use an acrylic vinyl adhesive for all the Ditra.