You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
wall
A wall is a structure and a surface that defines an area; carries a load; provides security, shelter, or soundproofing; or, is decorative. There are many kinds of walls, including:
Walls in buildings that form a fundamental part of the superstructure or separate interior rooms, sometimes for fire safety
Glass walls (a wall in which the primary structure is made of glass; does not include openings within walls that have glass coverings: these are windows)
Border barriers between countries
Brick walls
Defensive walls in fortifications
Permanent, solid fences
Retaining walls, which hold back dirt, stone, water, or noise sound
Stone walls
Walls that protect from oceans (seawalls) or rivers (levees)
What would you guys do with the walls to prep for fitting 1200mm x 600mm Onice Verde (Porcelain) tiles. In places the plaster is loose so obviously i'll take that off, but would you hack back to brick and the use backer board or.....
Hi, first time posting.
I’m in the middle of tiling my own bathroom, first time having a go at it. After doing a half wall and the first wall of the corner shower I’ve made a few mistakes but figured it out as I’ve gone.
Before starting the other shower wall I thought best to check the wall...
Wall & Floor Tiler Queensland Australia
Tile Right
About the role
Seeking a Wall & Floor Tiler to join our down to earth team. Mainly domestic insurance work around Brisbane Australia metro suburbs. This position can lead to permanent residency.
Why should you join us?
Yes, a total of 8...
How would you go about tiling a floor and or wall that's massively out of plumb ? When things like self level or plastering would raise the overall level too much?
This is my first time posting, I searched for a similar thread and didn't find much- apologies if this is a repeat!
My upstairs bathroom has a walk-in shower with marble wall tile and river stone floor. The river rock flooring is getting messed up. The grout is cracking and coming loose, and a...
Hi,
I'm trying to assess what prep is needed on the walls for my kitchen backsplash. We'll be using a metro tile or longer rectangular tile (up to 300mm length) in brickbond and as the walls have some bow on one side and a fairly substantial runout on the other, I'm trying to workout what I...
Morning guys and gals
My grandma had this hanging in her kitchen for as long as I can remember and I've had it in a drawer for the past ten years since she passed away.
There are no makers marks on the back just a little groove for a nail.
Sadly I broke the tail and glued it back on a few...
Looking for some technical advice on these tiles please.
Our installers fitted this CaPietra Ceramic tile in Oct 22. CCL Wetroom floor, tanked plasterboard to walls. We believe they used a ready-mix adhesive such as BAL White Star as it looks too white from installation photos to be...
Direct importer of high quality tiles & paving. Large Showroom. Nationwide delivery.
We are currently have an offer for 60cm x 120 at £12.99 m2.
9 different designs available.
PM me for more information.
Hello all,
After years of abuse, the bathroom needed an overhaul from top to bottom.
Out came the bath, sink and toilet. Corner bath still upside down in back garden....haven't got round to cutting it in quarters yet to take to the dump.
Toilet was never fixed to the floor 😆
Floor tiles...
Hi all, I'm Charlie, a wall and floor tiler and brick slip fitter from Staffordshire covering all of West Midlands and North West, currently working in shopfitting for projects in London but looking to start working closer to home, if anyone knows anyone looking for cscs tilers, would really...
Hi,
I have an issue here. My tiler has left a gap between the trim and the wall. No doubt the wall wasn’t true.
I have put some pics of this, but it’s hard to show well. The gap can be up to 6mm in places.
Two questions:
1 is this common practice? I would have thought that walls were...
Hi, so I’m relatively new to tiling. I’ve got a job where the walls aren’t 100% flat but not the worst. I’ve sealed the old plaster with a primer. Am I ok to dot and dab the tiles, I don’t mean 5 dots with 20% coverage, the dots I’d put on would get a minimum coverage of around a 70% adhesive...
I have started to notice a wet pattern look on my Porcelanosa Marmol Carrara Blanco bathroom wall tiles. I have looked at unfitted tiles and I do not believe the grey ‘wet’ looking patches to be a part of the design. Quite a lot of tiles display this pattern but not all. Also they are scattered...
My tiler split on me and left the shower walls half tiled. More importantly, they left a lumpy bumpy surface after installing backer board and RedGuard waterproofing.
See the pics for a brief visual backstory---
The job was to remove the bottom 3 rows of tiles around my tub that were cracked...
Hello and thanks for your time.
When the shower metal frame (that will hold the glass wall) is placed plumb along the tiled wall, you can see that the tiled wall is uneven. The top and bottom touches the tile wall but in the middle there is a huge 2cm gap between the metal and wall. Basically...
Tiling my en-suite was part of a larger build project. The builder subcontracted the tiler who did an excellent job. However, the builder didn’t order enough tiles so the tiler had to come back for an extra day to finish. The builder is now trying to charge me for this extra day saying he ran...
Doing a kitchen remodel and all is complete except for the backsplash. The kitchen previously had Formica countertops and Formica backsplash. The countertops have been replaced with quartzite. The Formica backsplash has remained, largely due to the fact that the cupboards stayed in place and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.