Make life easy, search the forum.

profiles

In order to use Bluetooth, a device must be compatible with the subset of Bluetooth profiles (often called services or functions) necessary to use the desired services. A Bluetooth profile is a specification regarding an aspect of Bluetooth-based wireless communication between devices. It resides on top of the Bluetooth Core Specification and (optionally) additional protocols. While the profile may use certain features of the core specification, specific versions of profiles are rarely tied to specific versions of the core specification, making them independent of each other. For example, there are Hands-Free Profile (HFP) 1.5 implementations using both Bluetooth 2.0 and Bluetooth 1.2 core specifications.
The way a device uses Bluetooth depends on its profile capabilities. The profiles provide standards that manufacturers follow to allow devices to use Bluetooth in the intended manner. For the Bluetooth Low Energy stack, according to Bluetooth 4.0 a special set of profiles applies.
At a minimum, each profile specification contains information on the following topics:

Dependencies on other formats
Suggested user interface formats
Specific parts of the Bluetooth protocol stack used by the profile. To perform its task, each profile uses particular options and parameters at each layer of the stack. This may include an outline of the required service record, if appropriate.This article summarizes the current definitions of profiles defined and adopted by the Bluetooth SIG and possible applications of each profile.

View More On Wikipedia.org
  1. O

    Schluters NEW Finec mitre profiles for thin tile and mosaic.

    Ok, so they’re not BRAND new, but @Schlüter-Systems Ltd looking to expand both sizes and colours, to include the Trend line colours. 45degree fine detail profiles to protect mitred edges from 2.5mm all the way up to 12.5mm. So I thought I’d try to get them some feedback. I’d appreciate it if...
  2. R

    USA Silicone joins at bottom of wall profiles

    Hi. Hope someone more knowledgeable than me can help. I am about to install a Merlyn Series 10 shower (sliding doors fitted in a tiled recess) and the instructions state that the inside of the vertical wall profiles need to be silicone sealed against the wall tiles (after the tray has been...
  3. Stevev

    USA Which silicone for double glazing profiles

    Hi, I'm putting dbl glazing profile back and they are usually siliconed together, but, which one? A general builders one?
  4. Schlüter-Systems Ltd

    Hello From Schlüter-systems Ltd

    Hello Everyone, Dan and Marc have reinstated our account after a slight technical issue during forum updates. Thanks to you both. We are here to help as and when required in relation to our products, training and services, drop us a PM or post a message and we will be here for you. If you...
  5. Dan

    Technical Guidance Note 10 on Tile Trim Profiles is available

    The Tile Association's latest technical publication - Click here for the full article.. RSS feed from For tiles, tilers, tiling and the tiles industry: The Tile Association.
  6. I

    Tabs in profiles

    Is it just me again!!!! I can't see the tabs in my own and other peoples profiles that say 'visitor messages', 'about me' and 'friends'. They're there for a second then get covered up with the visitors message box!!!
  7. C

    profiles needed

    hi guys and girls. have a bathroom that i am quoting on 16 m2 walls at 1.2m high 12 m2 floor. the walls are to be tiled in 450 x 350 tiles from topps brickbond the floor is brickbond slate 600 x 200. the customer would like to finish the tiles with a stainless profile,(but depending on...
  8. R

    Threshold Transition Profiles - Advice Please?

    Hi All, Have had our hallway tiled, which leads off onto several other rooms that are a combination of wooden laminate & carpet covering. This has expectedly resulted in a few different threshold challenges to be overcome. First, the tiling finishes at a different height to the other floor...
  9. L

    Is there a recession?? - Gradus Profiles

    Hi all, you will know me from my problem bathroom :lol:. I was looking for some unique profiles for going round a window/door frame (not on the wood through!!) and along the edge of a built in shelf next to the bath. Found a post about Gradus profiles from Macclesfield. Well I phoned them...
  10. C

    Using silicone profiles behind taps

    Yesterday I struggled siliconing behind taps on a bath. Normally I would think about removing the taps prior to doing this on a new install but removing both taps was not an option - they were agains the back wall. Any tips please? The karl dam profiles were too big. I cut another profile...
  11. A

    Where to buy and trim s/steel Schluter profiles?

    Where is reckoned to be the cheapest deal when buying odd lengths of Quadec & what is the neatest way of cutting it for the plug in corners? I know stainless is normally not that easy to cut cleanly compared to m/s or ali.
  12. M

    Schluter edge profiles

    Evening all, I've got a job next week and I need to use an edging strip but I'm using 6mm Hardibackers under the tile, what's the best way to fix the profile under the Hardibacker so that it can't be seen?
  13. D

    Movement Joints, Expansion Joints And Control Joint Profiles.

    Movement Joints, Expansion Joints And Control Joint Profiles from Schlüter® The movement joints, expansion joints and control joint profiles of our Schlüter-DILEX series offer maintenance free and functional solutions for all relevant movement joints in tile coverings. The...
  14. CUSH68

    stair profiles

    Hi all, Looking to source a supplier in the Glasgow area for stair nosing profiles. Got a job on next week but having difficulty finding these. Cheers Mark
  15. R

    tile trim corner profiles

    hi does anyone no where i can get corner profiles for 9mm white trim any help would be great....
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.

UK Tiling Forum Stats

Threads
66,600
Messages
866,704
Members
9,511
Latest member
mmcdon47
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock