You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
cutter
In professional wrestling, a cutter is a 3⁄4 facelock bulldog maneuver. This move sees an attacking wrestler first apply a 3⁄4 facelock (reaching back and grabbing the head of an opponent, thus pulling the opponent's jaw above the wrestler's shoulder) before falling backwards (sometimes after running forwards first) to force the opponent face-first to the mat below.
The cutter was innovated by Johnny Ace, who called it the Ace Crusher. It was later popularized by Diamond Dallas Page, who called it the Diamond Cutter, which is where the move got its name. The cutter also formed the base for the later development of another professional wrestling move known as the stunner.
I just unboxed my first proper tile cutter and tried a few cuts on some spare tiles. (BIG CLINKER)
It works ok but the cuts aren't exactly straight. I would say they wave/vary up to 1mm to 2mm on a long cut (30cm). Most often they are curving one way toward the middle of the cut and then...
Hi Folks,
Could somebody please point me in the right direction as to what they consider the best hole cutters/ drill bits are for porcelain tiles please. I seem to be throwing good money to bad on what I’m buying !! 😡
Hi there, been cutting 800 x 300 porcelain tile square cuts no problem for my bathroom walls however struggling to cut hex porcelain tiles corner to corner. The last 20 to 30mm breaks away from the score line. I checked the score and it does look or feel any different where the break veres...
Hi everyone
I need to replace my current cutter and would like feedback on the best wet cutter for professional use
Ideally a 200 blade as I have those, however considering the 180 models
Many thanks
Simon
Rubi Slim System Cutter 18911 for sale. Bought for a large format tiling job and used literally once, still in original packaging. Bought for £300.60, asking £180 + delivery. Pick up for free from Long Ditton, Surrey.
Feel free to ask any questions.
Hello! I am new here but I have been reading a lot about manual tile cutters on the forum. I am looking to get a quality tile cutter that will last a long time. I already have a wet saw and are looking for a manual tile cutter that can handle 400mm/16" tiles. My budget is around 350$.
I am far...
Whats the go 2 place for porcelain cutting cheap hole cutters and whats the top make currently so i can build up a collection. I use to richon years ago but not sure if theirs a better place thanks.
A while ago we had a blade company on the forum that manufactured in the UK. Think it was a small engineering firm. Can't remember their name or their cutter blade name. Or anything in fact.
Gone are the days of a rollerdex lol
I'm sure we would have had threads about them.
@Lou any clue?
Needed to cut 1200mm Porcelain tiles. A lot of them.
Didn't have £3k spare for an Italian machine, so this is what I built!
Cuts to 0.25mm over 1200mm.
I have just finished laying 400 tiles, all of which hd to be cut due to my choice of pattern...
So Vitrex machines can work ok, provided...
Hi all,
I come from Taiwan and got a 60x120x1.2 floor tile job.
But i only have Rubi DU-200L, so i'm looking for light large format tile cutter.
In Taiwan can find Rubi slim system with kit TC125 (about 800USD) and raimondi raizor cutting guides with cutting unit(about 2000USD).
Has anyone used...
Rubi 4 in 1 Work Bench only £69+VAT at our FREE Nicobond Technical Tiling Solutions Roadshow.
Terms and conditions apply. Orders must be placed in person on the day, at the event location by the person attending the seminar. Orders will be taken on the day and then ordered from Rubi. The items...
I know this has come up before, but wondered if anything new is out or if any one has any updates. I have the Dewalt D24000, but am looking at getting a smaller wet saw for small tiles. I have been looking at the Rubi ND 200, what’s everyone’s opinions? This looks like the only real option...
Hi All, my first post, so be gentle :)
I’ve been off the tools for a number of years, but the time has come to get them back together and redo my bathroom. I’ve lost touch with the tilers I used when I used to fit kitchens but to be honest I never thought they were as good as what they charged...
I have just brought a montolit 125 p3, it cuts very well on most tiles but this one porcelain tile that’s quite thin (about 5mm) and lightly textured, it simply will not cut it, unless I pass through tile numerous times! Have also tried it on retired rubi cutter and that had no chance! Is there...
Selling a battipav 1630mm cutter only cut around 30 tiles on it it’s basically only had it a month I can’t get on with it I like my montolits too much I just paid £450 from pro tiler tools wouldn’t mind getting something close to what I paid for it
Hi,
My wheel has pretty much ground to a halt, refusing to cut any more that an inch or so of porcelain without a struggle.
It's nowhere near worn out so I'm assuming it's gotten coated with something maybe. I've used one of those cleaning blocks in the past but didn't feel it was really helping...
Sold my last Rubi, TX1200 last month and purchased the Montolit Flashline Evo rail system that goes up to 3200mm ( no chance I’m ever doing them!! ). I bought it to replace the Rubi as it can sit in my little Combo and is nice and light compared to the Rubi (about 4 stone lighter)
So now I have...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.