Make life easy, search the forum.

Discuss Re-grouting exterior porcelain paving tiles with white grout in the The Welcome Forum area at TilersForums. USA and UK Tiling Forum

Reaction score
0
Please checkout the following advertisement.
I'm looking for some advice. About five years ago I had porcelain paving tiles laid on my patio and the installer used white porcelain grout. It is now starting to show gaps and I'm looking for some advice on the best rated white easy grout for exterior porcelain tiles to refurbish or should I completely renew the old grout? I like the striking lines of the white grout and would prefer to refurb or replace with the same appearance.
 
Reaction score
21
I'm looking for some advice. About five years ago I had porcelain paving tiles laid on my patio and the installer used white porcelain grout. It is now starting to show gaps and I'm looking for some advice on the best rated white easy grout for exterior porcelain tiles to refurbish or should I completely renew the old grout? I like the striking lines of the white grout and would prefer to refurb or replace with the same appearance.
Hi Richie,

Unfortunately, I've been waiting for this fall-out to happen from the trend in builders attempting to flag using thick porcelain tiles.

They have no idea about the substrate, moisture, temperature or correct adhesives to use with porcelain. Their brazen lack of care is frightening!

If the grout has cracked in any tile installation, then it's a sure sign that the bond between the tile and the substrate (what it was stuck to) has failed. Therefore, the tile is floating and re-grouting the joints won't hold them together I'm afraid. The grout will crack over and over again.

What has happened is that the whole floor has failed due to incorrect installation. Try lifting one up if you don't believe me....
 
OP
A
Reaction score
0
Hi Richie,

Unfortunately, I've been waiting for this fall-out to happen from the trend in builders attempting to flag using thick porcelain tiles.

They have no idea about the substrate, moisture, temperature or correct adhesives to use with porcelain. Their brazen lack of care is frightening!

If the grout has cracked in any tile installation, then it's a sure sign that the bond between the tile and the substrate (what it was stuck to) has failed. Therefore, the tile is floating and re-grouting the joints won't hold them together I'm afraid. The grout will crack over and over again.

What has happened is that the whole floor has failed due to incorrect installation. Try lifting one up if you don't believe me....
 
OP
A
Reaction score
0
Hi,
Thanks very much for your reply but I think my first post might have been misleading. When I said there were gaps between the tiles, I meant that in some places the grout has come out not that there has been any movement in the tiles themselves. The tiles were laid in accordance with the manufacturer's instructions and there hasn't been any movement in the tiles at all. The missing grout may be down to pressure cleaning but we tend to use a rotating brush attachment rather than the direct pressure wand which reduces the pressure considerably.
 
Reaction score
21
Sorry, but I beg to differ. If the grout has come loose, then the tiles are unstable (bond failure). Your pressure washing has probably forced a lot of water underneath the tiles, and once a gap through the grout has been breached, then this water will freeze under cold conditions, and the strength of the freezing water will break any bond between the tile and the substrate. There is no doubt in my mind that you have "floating" tiles. Manufacturers and shop-assistants aren't tilers, so please don't take their opinion.
 
Last edited:
OP
A
Reaction score
0
Sorry, but I beg to differ. If the grout has come loose, then the tiles are unstable (bond failure). Your pressure washing has probably forced a lot of water underneath the tiles, and once a gap through the grout has been breached, then this water will freeze under cold conditions, and the strength of the freezing water will break any bond between the tile and the substrate. There is no doubt in my mind that you have "floating" tiles. Manufacturers and shop-assistants aren't tilers, so please don't take their opinion.
Thanks for your feedback it's really appreciated.
 

Reply to Re-grouting exterior porcelain paving tiles with white grout in the The Welcome Forum area at TilersForums.com

Or checkout our tile training advice or the Tile Standards

This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Please visit our sponsor websites, they keep the forum free to use!

UK Tiling Forum Stats

Threads
66,599
Messages
866,698
Members
9,508
Latest member
sj1709
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock