briccolina wet cutter - Tile Advice

[poynton phil]

I had a briccolina when i first started out, and i only just put it out to stud, they are a fantastic little cutter, ieal for using inside, as there is hardly any spray, and will deffinitly be getting another one in the near future, as i miss it so much.

 

[Aston]

emc:tiles | briccolina

£113-50p!!!!

 

[Stef]

I bought a replacement Marcrist blade for my little Briccolina & it aint good,

Chips tiles badly, going to send it back very soon.

Anyone got a good recommendation for a good quality replacement blade?

 

[Stef]

Cheers, ive already ground the nib off so just have to find a good one that fits.

I used to use Marcrist blades all the time, in other cutters though, but this latest CK850 is the worst i have had.

Ive owned a couple of CK850's & they were ok blades.

Wish Montolit produced a blade that fitted the Briccolina.

 

[White Room]

The one I got from TT is as good as gold and cheaper than Marcrist.....

 

[Billy Hunt]

I'm very close to purchasing one of these,The feedback on the blades is a little off putting though,don't want to be grinding bits off to make the blades fit,Ive emailed Trade tiler for advice but no response.

Anyone know of other good stockists of replacement blades?

 

[White Room]

Remember if you don't grind the nib off you will have to get a replacement blade from Briccolina as they have a hole in the cutting wheel..

 

[Noitavonni]

My Briccolina has jet died :mad2: so I have a part worn blade, nut and orange base tray for sale. Best offers to my inbox please...

 

[Noitavonni]

sorry, should have said "just died"

 

[Stef]

I'm very close to purchasing one of these,The feedback on the blades is a little off putting though,don't want to be grinding bits off to make the blades fit,Ive emailed Trade tiler for advice but no response.

Anyone know of other good stockists of replacement blades?

I purchased a black diamond blades from e-bay & its not bad, £16.

I havent used it much but i was cutting glazed bricks & there was hardly any chipping. A lot better blade than the Marcrist.

I will give more feedback the more i use it.

Billy i was a bit dubious about grinding the nib off but its a doddle, 30 second job & no difference in performance.

 

[White Room]

I purchased a black diamond blades from e-bay & its not bad, £16.

I havent used it much but i was cutting glazed bricks & there was hardly any chipping. A lot better blade than the Marcrist.

I will give more feedback the more i use it.

Billy i was a bit dubious about grinding the nib off but its a doddle, 30 second job & no difference in performance.

I agree

 

[kilty55]

emc sell the blades for the briccolina guys n gals,hope naming emc doesnt break rules?

 

[DHTiling]

emc sell the blades for the briccolina guys n gals,hope naming emc doesnt break rules?

No , that's fine.

 

[kilty55]

cool

 

[Dan]

You can name what you want these days matey. And link to anything you want too.